cystech electronics corp. spec. no. : c662j3 issued date : 2010.10.26 revised date : 2010.12.08 page no. : 1/6 BTB4511J3 cystek product specification pnp epitaxial planar high curre nt (high performance) transistor BTB4511J3 features ? 5 amps continuous current, up to 10 amps peak current ? very low saturation voltage ? excellent gain characteristic s specified up to 10 amps ? extremely low equivalent on resistance, r ce(sat) =70m at 4a ? pb-free lead plating package symbol outline to-252(dpak) BTB4511J3 b base c collector e emitter b c e absolute maximum ratings (ta=25 c) parameter symbol limits unit collector-base voltage v cbo -140 v collector-emitter voltage v ceo -100 v emitter-base voltage v ebo -6 v continuous collector current i c -5 a peak collector current i cp -10 a base current i b -1 a power dissipation @t a =25 c 1.5 w p d 20 power dissipation @t c =25 c w operating and storage temperature range tj ; tstg -55 ~ +150 c
cystech electronics corp. spec. no. : c662j3 issued date : 2010.10.26 revised date : 2010.12.08 page no. : 2/6 BTB4511J3 cystek product specification thermal data parameter symbol value unit thermal resistance, junction-to-case, max r th,j-c 6.25 c/w thermal resistance, junction-to-ambient, max r th,j-a 83.3 c/w characteristics (ta=25 c, unless otherwise specified) symbol min. typ. max. unit test conditions bv cbo -140 -170 - v i c =-100 a bv cer -140 -170 - v i c =-1 a, r be 1k bv ceo -100 -120 - v i c =-10ma bv ebo -6 -8 - v i e =-100 a i cbo - - -50 na v cb =-100v i cer - - -50 na v ce =-100v, r be 1k i ebo - - -10 na v eb =-5v *v ce(sat) 1 - -18 -50 mv i c =-100ma, i b =-10ma *v ce(sat) 2 - -85 -115 mv i c =-1a, i b =-100ma *v ce(sat) 3 - -155 -220 mv i c =-2a, i b =-200ma *v ce(sat) 4 - -280 -420 mv i c =-4a, i b =-400ma *v be(sat) - -990 -1170 mv i c =-4a, i b =-400ma *v be(on) - -910 -1160 mv v ce =-1v, i c =-4a h fe 1 100 200 - - v ce =-1v, i c =-10ma h fe 2 100 200 300 - v ce =-1v, i c =-1a *h fe 3 50 90 320 - v ce =-1v, i c =-3a *h fe 4 30 50 - - v ce =-1v, i c =-4a *h fe 5 - 15 - - v ce =-1v, i c =-10a f t - 125 - mhz v ce =-10v, i c =-100ma, f=50mhz cob - 65 - pf v cb =-10v, f=1mhz ton 110 ns toff 460 ns i c =-2a, i b 1=-200ma, i b 2=200ma, v cc =-10v *pulse test: pulse width 300 s, duty cycle 2% ordering information device package shipping BTB4511J3-0-t3-g to-252 (pb-free lead plating an d halogen-free package) 2500 pcs / tape & reel
cystech electronics corp. spec. no. : c662j3 issued date : 2010.10.26 revised date : 2010.12.08 page no. : 3/6 BTB4511J3 cystek product specification typical characteristics current gain vs collector current 10 100 1000 1 10 100 1000 10000 collector current---ic(ma) current gain---hfe vce=1v vce=2v saturation voltage vs collector current 1 10 100 1000 10000 1 10 100 1000 10000 collector current---ic(ma) saturation voltage---(mv) ic=10ib vce(sat) ic=20ib ic=50ib saturation voltage vs collector current 100 1000 10000 1 10 100 1000 10000 collector current---ic(ma) saturation voltage---(mv) vbe(sat) @ ic=10ib on vottage vs collector current 100 1000 10000 1 10 100 1000 10000 collector current---ic(ma) on voltage---(mv) vbe(on)@vce=1v power derating curve 0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 0 50 100 150 200 ambient temperature---ta() power dissipation---pd(w) power derating curve 0 5 10 15 20 25 0 50 100 150 200 case temperature---tc() power dissipation---pd(w)
cystech electronics corp. spec. no. : c662j3 issued date : 2010.10.26 revised date : 2010.12.08 page no. : 4/6 BTB4511J3 cystek product specification reel dimension carrier tape dimension
cystech electronics corp. spec. no. : c662j3 issued date : 2010.10.26 revised date : 2010.12.08 page no. : 5/6 BTB4511J3 cystek product specification recommended wave soldering condition soldering time product peak temperature pb-free devices 260 +0/-5 c 5 +1/-1 seconds recommended temperature profile for ir reflow profile feature sn-pb eutectic assembly pb-free assembly average ramp-up rate (tsmax to tp) 3 c/second max. 3 c/second max. preheat ? temperature min(t s min) ? temperature max(t s max) ? time(ts min to ts max ) 100 c 150 c 60-120 seconds 150 c 200 c 60-180 seconds 183 c 60-150 seconds time maintained above: ? temperature (t l ) 217 c ? time (t l ) 60-150 seconds peak temperature(t p ) 240 +0/-5 c 260 +0/-5 c time within 5 c of actual peak 10-30 seconds 20-40 seconds temperature(tp) ramp down rate 6 c/second max. 6 c/second max. time 25 c to peak temperature 6 minutes max. 8 minutes max. note : all temperatures refer to topside of the pack age, measured on the package body surface.
cystech electronics corp. spec. no. : c662j3 issued date : 2010.10.26 revised date : 2010.12.08 page no. : 6/6 BTB4511J3 cystek product specification to-252 dimension inches millimeters inches millimeters dim min. max. min. max. dim min. max. min. max. a 0.087 0.094 2.200 2.400 e 0.086 0.094 2.186 2.386 a1 0.000 0.005 0.000 0.127 e1 0.172 0.188 marking: device name date code b4511 1 2 3 4 style: pin 1.base 2.collector 3.emitter 4.collector 3-lead to-252 plastic surface mount package cystek package code: j3 4.372 4.772 b 0.039 0.048 0.990 1.210 h 0.163 ref 4.140 ref b 0.026 0.034 0.660 0.860 k 0.190 ref 4.830 ref b1 0.026 0.034 0.660 0.860 l 0.386 0.409 9.800 10.400 c 0.018 0.023 0.460 0.580 l1 0.114 ref 2.900 ref c1 0.018 0.023 0.460 0.580 l2 0.055 0.067 1.400 1.700 d 0.256 0.264 6.500 6.700 l3 0.024 0.039 0.600 1.000 d1 0.201 0.215 5.100 5.460 p 0.026 ref 0.650 ref e 0.236 0.244 6.000 6.200 v 0.211 ref 5.350 ref notes: 1.controlling dimension: millimeters. 2.maximum lead thickness includes lead finish thickness, and minimum lead thickness is the minimum thickness of base material. 3.if there is any question with packing specification or packing method, please c ontact your local cystek sales office. material: ? lead : pure tin plated. ? mold compound: epoxy resin family, flammability solid burning class: ul94v-0. important notice: ? all rights are reserved. reproduction in whole or in part is prohibited without the prior written approval of cystek. ? cystek reserves the right to make changes to its products without notice. ? cystek semiconductor products are not warranted to be suitable for use in life-support applications, or systems. ? cystek assumes no liability for any consequence of customer pr oduct design, infringement of pat ents, or application assistance .
|
